sml logo Dark Ages Re-Creation Company sml logo
Sep, 2018
July, 2017
June, 2017
Oct 15, 2016
Sep 26, 2016
Oct 13, 2012
Oct 7, 2012
Sept, 2012 - Baron's Howe ('12)
Oct 15, 2011
Sep 10, 2011
Sep 26, 2009
Jul 18, 2009
Jul 4, 2009
May 30, 2009
Sep 1, 2008
Jul 20, 2008
Jul 1, 2008
Jun 14, 2008
First Experiment
Questions & Answers
Crafts in Ribe
Glass Beads
Stone Beads
Bead Summary
Small Summary
Bead Classifier

15 Oct 2011 - More temperature records

The goal of this day was to get some additional temperature measurements for different designs of furnaces for a paper we are working on.

The outcome of this series was the paper:
Glass on Fire: Temperatures in reconstructed Viking Era bead furnaces, in "Can These Bones Come to Life?" Insights from Reconstruction, Reenactment, and Re-creation Vol II. It is available from Freelance Academic Press.

We ran three furnaces this time - the "Sarah", the "Goderich", and the "Neil".

Furnace NameArchaeologyDescriptionNotes
NeilRibe Circular designA "teapot" design. Single chimney, with annealing pot attached to one side. A single working port cut into the body. Charcoal is loaded through the working port or chimney. Walls are standard thickness (3cm) and have a very pronounced curve joining walls and floor in a bowl shape to aid in charcoal concentration. The working port is cut high on the wall. 
SarahRibe OvalA smaller version of the standard shape built with a single chimney. This had originally been intended to work as a single working port but the plan was changed. A port was cut into each end, and a diverter added to the inside. The air port was cut in the usual location. 
GoderichRibe OvalDual chimney oval furnace, cobb construction. Internal construction includes gentle slopes from walls to floor, and a large air diverter opposite the air port. There is no opening cut for charging - charcoal is added through the chimneys. Working ports are cut into each end. Right port uses cuts angled up into the furnace. Left port cuts angle down into the furnace. Right port produces more heat onto the bead maker.Good functional furnace with 10 hours of burn time.

Several videos were made to allow us to plot temperature over time, both in the chimney and in the door. These are the results.

Operating temperatures

All temperatures are in celcius.

Compressed video (8x normal speed) to go with the chart below

Compressed video (8x normal speed) to go with the chart below

We also got a chance to run and record the "goderich" furnace the next weekend
Compressed video (8x normal speed) to go with the chart below


We also have a few videos available:
Decorating a bead with reticella
Drawing reticella rod
Creating millifiore

thumbnail thumbnail thumbnail thumbnail
The "Neil" furnace Winding on glass Working a bead in the chimney Working a bead in the chimney
thumbnail thumbnail thumbnail thumbnail
Temperature of "Neil" furnace The "Sarah" furnace Working in the door Reticella
thumbnail thumbnail thumbnail thumbnail
Pulling reticella Adding more glass Rolling a bead Touchng up an edge
thumbnail thumbnail   
Adding reticella Sarah getting ready

Beads Produced

thumbnail thumbnail thumbnail thumbnail
Black - impacted by atmosphere Blue decorated Blue with reticella Wasp bead
thumbnail thumbnail thumbnail thumbnail
Wasp bead 2 Wasp bead 3 Rayed eye bead Dotted
thumbnail thumbnail thumbnail thumbnail
Light blue Clear Black with ringed eye Second view of bead
thumbnail thumbnail thumbnail thumbnail
Yellow with dots Bead with reticella Second view Black with red and yellow bands
thumbnail thumbnail thumbnail  
Second view White Two temps


Following this session the bead furnaces were broken down in order to record more information about their construction.


Exterior diameter of base22.5 cm
Thickness of base18 mm
Interior bowl width13 cm
Depth of bowl (to bottom of door)11 cm
Bottom of tuyure to bottom of bowl5 cm
Bottom of bowl to top of chimney22.5 cm

MeasurementTotal (mm)Sintered (mm)Dark Clay (mm)
Wall at base of bowl70.584.5516
Wall half way to door34.914.335.5
Wall at door31.337.2413.18
Wall at top of door25.018.729.08
Wall at top of chimney13.296.275.4
The floor had only a thin amount of sintered clay, most of it was just blackened. At the center of the bowl the black was the full thickness while at the edges there was unblackened clay at the bottom.
On the inside of the bowl the bottom is partially blackened and partially unblackened. The black area is on the side of the bowl closest to the door and covers a part of the interior wall.

thumbnail thumbnail thumbnail thumbnail
Top view Side view Air inlet Opened between door and tuyure
thumbnail thumbnail   
Wall above door Side view of cross-section


Exterior length40 cm
Interior length32 cm
Exterior width21 cm
Interior width14 cm
Interior tuyure to diverter8.5 cm
Exterior height25 cm
Interior height (to bottom of chimney)20 cm
Thickness of base18 mm
Interior bowl width13 cm
Depth of bowl (to bottom of door)11 cm
Bottom of tuyure to bottom of bowl5 cm
Bottom of bowl to top of chimney22.5 cm

MeasurementTotal (mm)Sintered (mm)Dark Clay (mm)
Chimney 2nd location167.77.4
Chimney 3rd location16.26.25.2
Top shoulder at chimney22.59.28.2
Top shoulder at chimney 2nd location24.811.911.9
Above Tuyure36.517.712.8
Above Door32.519.311.1
Wall under tuyure351319
Wall under tuyure at base504.538.7

thumbnail thumbnail thumbnail thumbnail
Back view End view Wall below tuyure Side view, wall below tuyure
thumbnail thumbnail thumbnail  
End view with door Base Floor


Exterior width of base25 cm
Exterior length of base54 cm
Thickness of base18 mm
Interior bowl width13 cm
Base to bottom of door2.6 cm
Door height6.2 cm
Base to top of chimney28 cm

MeasurementTotal (mm)Sintered (mm)Dark Clay (mm)
Tuyure wall at base54.5012.52
Tuyure wall 1" up37.187.2910
Tuyure wall 2" up34.9711.4814.38
Tuyure wall 3" up34.6815.913.17
Tuyure wall 4" up30.2913.0514.25
Tuyure wall 5" up31.7511.2510.88
Tuyure wall 6" up23.597.958.69
Tuyure wall 7" up19.2311.517.2
Tuyure wall 8" up21.8510.340
Tuyure wall 9" up20.328.580
Tuyure wall 10" up15.76.910
Tuyure wall at top of chimney15.85.440
Back wall at base40.688.2422.61
Back wall 1" up32.8611.9114.44
Back wall 2" up35.2710.3419
Back wall 3" up32.9514.279.73
Back wall 4" up29.5513.118.25
Back wall 5" up24.0511.065.09
Back wall 6" up21.8312.626.01
Back wall 7" up16.958.624.13
Back wall 8" up17.756.685.66
Back wall 9" up20.728.125.79
Back wall 10" up19.249.116.32
Side wall above door28.7315.519.67
Base a door52.7818.9125.07
Base 7cm in from door255.82All

The inside of the base showed almost no blackening. Just a small amount at the midpoint between the door and tuyure.
Underneath the base (exterior) heat blackening was visible in a fairly regular oval starting about 3cm from the edge. There was no visible difference in the heat marking where the air diverter is found.

thumbnail thumbnail thumbnail thumbnail
End view Back view Top view Air diverter
thumbnail thumbnail thumbnail thumbnail
Door to back wall Interior Underside of base Base cross-section
Plan drawings

Text © Neil Peterson, 2011
Photographs © Individual artists
Copyright details
Contact us